Page History
...
TonidoPlug related configuration is always done using the Tonido Plug Admin. To access Plug Admin pages, login into your account, click on the "TonidoPlug Admin" link on the left.
You will need to enter your Plug Admin password you had setup during initial plug setup. Use your admin password to login. Remember, this password is different from your Tonido account password.
| Info |
|---|
Please note that you can only open Plug Admin if you are in the same LAN as the TonidoPlug (however there is a way to make this Plug Admin accessible remotely in recent TonidoPlug software). |
2. Change Network Settings (
...
Once you login into Plug Admin, TonidoPlug's network settings are available on the Network Tab. You can set a static IP address or DHCP address.
...
Wireless)
Configure Wifi
Enter Wifi details such as SSID, wifi type and password to connect.
...
3. Set Address Type
Address Type - DHCP (Default)
...
You can get inputs for subnet, gateway and DNS from your network administrator or you can find this information from another machine connected to the same local network. In Windows machine connected to the local network, open a command prompt and type "ipconfig /all", you will see values for subnet, gateway and DNS listed.
...
4. Configure HotSpot
- Select the hotspot mode "EXPERIMENTAL: Share network connection with other devices (Hotspot mode)"
- Set the SSID for the Hotspot
- Choose a DHCP range that is different from your current LAN (LAN to which TonidoPlug is connected)
- Click "Enable Hotspot"
Pl note: Tonidoplug should be connected 'wired' for HotSpot to work.
| Info |
|---|
Note: Wired connections are robust, reliable and recommended than Wireless connections |
...
Overview
Content Tools
Apps