Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 21 Next »

Verifying Your Installation

After the FileCloud installation is completed, the next step is to verify whether the system is installed properly.

FileCloud is bundled with a verification tool to help you test your installation. You can run this tool from the server where FileCloud is installed or remotely from a different system. This tool will perform various configuration checks related to your FileCloud environment.

Verification checks are grouped into two categories:

  • Basic Checks
  • Extended Tests

It is recommended that you run basic checks at a minimum. For more thorough testing you can run extended tests.

This tool will also report problems so you can correct them before using FileCloud. 

All failures reported by the verification tool must be fixed before attempting to use FileCloud.

 

To verify your FileCloud installation:

  1. From the FileCloud server, or the VM instance, open a web browser and enter the following address: 
http://127.0.0.1/install

To run verification tests from a system that does not have the FileCloud installation, replace 127.0.0.1 with the IP of the system where FileCloud is installed.

    2. To run basic tests, select Basic Checks.

    3. To run more thorough tests, select Extended Checks.

  • No labels