Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 30 Next »

After the FileCloud installation is completed, the following steps will help you prepare FileCloud for use:

  1. Verify Your Installation.
  2. Install the FileCloud License.
  3. Configure the Managed Storage Path.
  4. Enable MongoDB Authentication.

Verify Your Installation

FileCloud is bundled with a verification tool to help you test your installation. You can run this tool from the server where FileCloud is installed or remotely from a different system. This tool will perform various configuration checks related to your FileCloud environment.

Verification checks are grouped into two categories: basic and extended. It is recommended that you run basic checks at a minimum to ensure that the required components are available to FileCloud. Once the Basic checks pass, Extended checks should be run to verify that required directories and configurations are available.

Basic ChecksExtended Checks
Apache Web ServerCloudConfig.php readable
Apache Mod RewriteLocalstorageconfig.php readable
.htaccess PresentScratch Directory Writable
PHP 5.6 or higherConfig Directory Readable
PHP MongoDB (mongodb ext) driver 1.2.3 or higherMod Rewrite Apache Configuration Setup Check
PHP GD LibraryPHP Memcache Server (Optional)
PHP Zip libraryVerification of Mongo DB connection
PHP Curl Library
PHP OpenSSL library
PHP ionCube extension 4.4.1 or higher
PHP bcmath extension
PHP SimpleXML extension
PHP mbstring extension
PHP LDAP library (optional)
PHP Memcache Extension (optional)
Install in Server WWW root folder
CloudConfig.php Readable

This tool will also report problems so you can correct them before using FileCloud. 

All failures reported by the verification tool must be fixed before attempting to use FileCloud.


Running the Verification Tool

To verify your FileCloud installation:

  1. From the FileCloud server, or the VM instance, open a web browser and enter the following address:

To run verification tests from a system that does not have the FileCloud installation, replace with the IP of the system where FileCloud is installed.

    2. To run basic tests, select Basic Checks.

    3. To run more thorough tests, select Extended Checks.

  • No labels